Garage Door Garage Door Sensor Installation in Utah
Photo-eye safety sensors are required by UL-325 on every garage door opener manufactured since 1993. They detect obstructions in the door's path and either reverse the door (during close) or refuse to start (when activated). When sensors are misaligned, dirty, sun-blinded, or failed, the door either refuses to close at all or — worse — closes without sensing an obstruction. Our sensor installation service replaces failed sensors, realigns drifted brackets, cleans the eye optics, and verifies auto-reverse on a real obstruction test.
Replacement eyes are brand-specific (LiftMaster has a different connector and signal pattern than Genie). We stock the major brands and most legacy models. Brackets occasionally need replacement when corrosion has degraded them or impact has bent them. Bracket alignment is critical — eyes that are slightly off-aim trigger intermittent close failures that drive homeowners crazy.
Every visit ends with an obstruction test: a 1.5-inch (3.8 cm) tall object placed under the door at three positions across the opening. The door must reverse when it touches the object. This is the UL-325 baseline — if the door doesn't pass, the install isn't complete. We document the test results on the work order.
Signs you need garage door sensor installation
Door refuses to close from remote
Misaligned or dirty photo-eyes prevent close. The opener's status light usually blinks 10 times to indicate the photo-eye fault.
Door closes part-way then reverses
Photo-eyes detecting a phantom obstruction (often sun glare or insects). Realignment or shielding usually fixes.
Status light blinks 10 times
Universal LiftMaster code for photo-eye fault. Genie and Chamberlain have similar fault patterns.
Sensors visibly knocked out of alignment
Bumped brackets, lawn-equipment impacts, or vehicle contact all knock sensors out of aim. Realignment is a quick fix.
Older opener with no sensors
Pre-1993 openers don't have photo-eyes. Retrofit is possible on most models — and brings the door to current safety code.
Common causes & what we fix
Bracket misalignment
Brackets shift slightly from temperature cycling, vibration, or contact. Even a few degrees off-aim breaks the sensor beam.
Lens dirt or insects
Dust, spider webs, and insect carcasses block the infrared beam. Cleaning the lens often restores function.
Sun glare interference
Direct sunlight hitting the receiver lens can saturate the sensor and trigger false obstruction. Shielding or repositioning fixes.
Wire damage
Mice chew sensor wires; landscapers occasionally cut them. Replacement and re-routing fixes.
Sensor end-of-life
Photo-eye electronics fail at 10–15 years. Replacement is inexpensive and quick.
Our process
- Call or schedule online. Start your garage door sensor installation request by phone or online. Pick a 2-hour window; a five-minute confirmation follows with the tech's name and photo.
- On-site diagnosis. Our Utah tech inspects the garage door sensor installation on-site first. Diagnosis is free for most repairs ($39 on minor calls, waived if you proceed), and you see the problem before any work starts.
- Flat-rate quote. Before starting, we hand you a written, flat-rate garage door sensor installation estimate. What you see is what you pay — no hourly surprises, no commission-driven add-ons.
- Same-visit fix. Most garage door sensor installation jobs are finished the same visit — a 96% first-call fix rate. We test the door with you before leaving and clean up everything we touched.
How much does garage door sensor installation cost in Utah?
Garage Door Sensor Installation the United States starts at from $99, and every garage door sensor installation quote is flat-rate and presented in writing before work begins — no surprise add-ons, no hourly creep. Seniors (65+) and military save 10% on labor across all residential work, and Synchrony financing covers projects over $1,500 at 0% APR for the first 12 months, with fast approval and no prepayment penalty.
Why homeowners in Utah choose us for garage door sensor installation
We've been a trusted choice since 1974 — over 50 years of family-owned garage door service across Utah. Our techs are CSLB-licensed (#1098234), background-checked, and complete an internal 12-week training program before rolling on calls alone.
Your garage door sensor installation in Utah is covered by a 10-year workmanship guarantee — distinct from any parts warranty the manufacturer provides. If our garage door sensor installation fails on us, we fix it free for a decade. Springs built for 30,000 cycles carry a lifetime warranty for the original homeowner, and remaining parts run standard 1–5 year coverage.
Garage door sensor installation is quoted on honest sizing and honest scope: we flag only what genuinely needs work, our salaried techs never chase a commission, and the diagnostic is transparent down to the parts in great shape. Repair or replace, we give you the long-term-economic answer — and a written, flat-rate quote good for 30 days.
Areas we serve for garage door sensor installation
We provide garage door sensor installation throughout Utah, with fast coverage in every major Utah metro.
Garage door sensor installation arrival times in Utah rise and fall with traffic, so we quote the ETA when you call instead of over-promising. Dispatch puts you on with an on-call tech, not a recording.
Frequently asked about garage door sensor installation
Top questions homeowners searching for Garage Door Sensor Installation near me ask us: